POBCO Materials 2

POBCO ApS

 

POBCO Performance Materials 2

 

POBCO RULON LR ((NON FDA)

Specially compounded forms of PTFE Fluropolymer used as a bearing material which requires no lubrication and is capable of performing under severe temperature and corrosive conditiuons. The operating temperatue ranges from -400 to +550 F.

 

POBCO RULON 641

White plastic is approved for use in the food and Drug, and Chemical Industry. This material is common for high heat applications up to 550 F. It's friction decreases rapidly with increasing load. Other grades of Rulon also ar avaiable with higher / lower PV values for nonfood applications.

 

POBCO PTFES & FLUROCARBONS

Highly chemically resistant, with operating temp. range of 450 - 550 F depending on the additive. High PV ratings and some food grades avaible

 

POBCO FLUORSINT 207

High Temp. 500 F MICA filled PTFE (PTFE) material; FDA compliant; less abrasive & more resistant than common filled PTFE materials; suitable for steam or hot air use.

 

POBCO POBLON

Is aHI-Temp (500 F), proprietary blend of PTFE. POBLON is FDA / USDA compiant. Used in food and pharmaceutical applications such as ovens, fryers, proofing & curing operations. A less expensive alternative to Rulon 641. Color is off-white.

 

POBCO PEEK

High Temp. 480 F, High PV limits, low coeficient of friction excellent chemical & wear resistant.

 

POBCO TORLON

4301 Bearing grade, High Temp. 475 F, dimensionally stable & chemically resistant at High Temps. High PV Limits.

 

POBCO PET-P (POLYESTER)

Better stability than Acetals, less moisture absorption & better wear resistance than many plastics, operates at 230 F continuosly, FDA compliant, weater resistant. Good chemical and abrasion resistance.

 

POBCO KYNAR (PVDF)

Resistance to many concentrated acids, alkalis and solvents, runs up to 300 F in many applications, FDA & USDA compliant non-leaching, meets USDA 3A standards for dairy equipment.

 

POBCO PTFE COATED FABRIC & PRESSURE SENSITIVE TAPES

High Temp. belting, heat sealing liners, wear strips, FDA compliant grades, flexible non-stick, stable, low friction.

 

POBCO DRY WEAR DRY LUBE FILLED UHMW-PE

Black color Non-FDA. Improved coefficient of friction and anti-static properties. Beter in dusty applications; less build-up. UV stabilized